濟南蓬髮建材有限公司為您提供臨邊護欄▩·•│、木工防護欄▩·•│、工程圍擋等相關資訊釋出和相關資訊✘✘,敬請關注✘╃·•!
聯絡我們
諮詢電話
139 6412 5269

聯絡:張經理

手機: 139 6412 5269

郵箱: 394441862@qq.com

網址:http://www.shdihang.com/

地址:山東省濟南市章丘聖井工業園

當前位置•₪✘✘: 首頁 > 新聞中心 > 行業動態 >

木工加工棚的規範搭設做法有哪些◕₪₪?

來源•₪✘✘:http://www.shdihang.com/   釋出時間•₪✘✘:2022-09-07

木工加工棚是建築工地上常用的設施✘✘,給建築工程帶來很大的便利✘✘,正確搭建規範的加工棚非常重要│☁✘☁。下面✘✘,我們跟廠家來詳細瞭解加工棚的規範做法│☁✘☁。希望以下內容對您能有幫助│☁✘☁。
Woodworking shed is a common facility on construction sites, which brings great convenience to construction projects. It is very important to correctly build a standardized processing shed. Next, we will learn more about the standard practices of the processing shed from the manufacturer. I hope the following contents can help you.
當臨街通道▩·•│、場內通道▩·•│、出入建築物通道▩·•│、施工電梯及物料提升機地面進料口作業通道處於墜落半徑內或處於起重機起重臂迴轉範圍內時✘✘,設定加工棚及防護通道✘✘,以避免發生物體打擊事故│☁✘☁。
When the street side passage, the on-site passage, the passage to and from the building, the operation passage of the construction elevator and the ground feed inlet of the material elevator are within the falling radius or within the slewing range of the crane jib, the processing shed and the protective passage shall be set up to avoid the occurrence of biological strike accidents.
防護通道▩·•│、加工棚應採用建築鋼管扣件腳手架或其他型鋼材料搭設✘✘,嚴禁採用竹木杆件搭設加工棚│☁✘☁。
The protective passage and processing shed shall be erected with scaffold of building steel pipe fastener or other profile steel materials. It is forbidden to erect processing shed with bamboo and wood rods.
防護通道及加工棚的頂部嚴密鋪設雙層正交竹串片腳手板或雙層正交18厚木模板的水平硬質防護✘✘,及封閉的防護欄或擋板✘✘,整體應能承受10kPa的均布靜荷載│☁✘☁。塔吊主要經行線路▩·•│、轉料平臺▩·•│、卸料平臺落物曲線範圍內的防護通道及加工棚頂部嚴密鋪設雙層正交50厚木板│☁✘☁。
The top of the protection channel and processing shed shall be tightly paved with double-layer orthogonal bamboo string piece scaffold board or double-layer orthogonal 18 thick wood formwork for horizontal hard protection, as well as closed protective fence or baffle, which shall be able to withstand a uniform static load of 10KPA as a whole. The tower crane mainly passes through the protective passage within the falling curve of the line, transfer platform and unloading platform, and the top of the processing shed is tightly laid with double-layer orthogonal 50 thick wood plates.
特別重要或大型的防護通道▩·•│、加工棚及懸挑式防護設施制定專項技術方案✘✘,經企業技術負責人審批後實施│☁✘☁。
Special technical schemes shall be formulated for particularly important or large protective passages, processing sheds and cantilevered protective facilities, which shall be implemented after being approved by the technical director of the enterprise.
木工加工棚
防護通道淨空高度和寬度應根據通道所處位置及人▩·•│、車通行要求確定✘✘,高度一般不低於3.5m✘✘,寬度一般不低於3m│☁✘☁。高度在15m以下建築物✘✘,其進出口通道長度不低於3m;高度在15-30m的建築物✘✘,其進出口通道長度不低於4m✘✘,高度超過30m的建築物✘✘,其進出口通道長度不低於5m│☁✘☁。
The clearance height and width of the protection channel shall be determined according to the position of the channel and the requirements for the passage of people and vehicles. Generally, the height shall not be less than 3.5m and the width shall not be less than 3m. For buildings with a height of less than 15m, the length of inlet and outlet channels shall not be less than 3m; For buildings with a height of 15-30m, the length of the inlet and outlet channels shall not be less than 4m; for buildings with a height of more than 30m, the length of the inlet and outlet channels shall not be less than 5m.
通道長度自腳手架外排立杆起算│☁✘☁。立杆基礎硬化處理✘✘,通道使用期內不得發生地面沉陷✘✘,立杆沿通行方向通長設定掃地杆和剪刀撐│☁✘☁。常規防護通道立杆縱距不應超過1200mm✘✘,加工棚懸挑尺寸為300~500mm✘✘,雙層加工棚層間距為500~600mm│☁✘☁。
The length of the passage is calculated from the outer row of the scaffold. The foundation of the upright pole shall be hardened, and the ground shall not sink during the service life of the passage. The upright pole shall be provided with a sweeping pole and cross bracing along the whole length of the passage direction. The longitudinal distance between the vertical poles of the conventional protection channel shall not exceed 1200mm, the overhanging size of the processing shed shall be 300-500mm, and the interval between the layers of the double-layer processing shed shall be 500-600mm.
以上內容是廠家為大家介紹的關於加工棚規範做法✘✘,如果您不瞭解這個問題✘✘,可以參考文中講述的內容✘✘,或者和我們聯絡http://www.shdihang.com✘✘,我們可以為您提供詳細的解答和產品服務│☁✘☁。
The above content is about the standard practice of processing shed introduced by the manufacturer. If you don't understand this problem, you can refer to the content in the text or contact us http://www.shdihang.com , we can provide you with detailed answers and product services.

办公室双腿打开揉弄高潮,男人j桶进女人p无遮挡动态图,欧洲肉欲k8播放毛片,伊人久久大香线蕉AV一区